باترون بونشو كروشيه بالباترون للبنات شيك جدا

باترون-بونشو-كروشيه-للبنات-قصير-بغرزة مخرمة-بونشوهات كروشيه بالباترون لبنات الجامعه

بسم الله الرحمن الرحيم

باترون بونشو كروشيه بالباترون للبنات شيك جدا

Crochet poncho



Size: S - M - L - XL - XXL - XXXL

Materials:Colour no 78, silver green:
250-300-300-350-350-400 g

CROCHET HOOK SIZE 4.5 mm - or size needed to get 18 tr x 8 rows = 10 x 10 cm (1 repetition of diagram A.1 = width approx. 7.5 cm and 6 cm vertically, 1 repetition of diagram A.2 = width approx. 9.5 cm and 4 cm vertically).

PATTERN:
See diagrams A.1 to A.3 and read explanation below.

INCREASE TIP 1 (applies ROW 2):
Inc 1 tr by working 2 tr in same dc.

INCREASE TIP 2:
All inc are done on rows/rounds with only tr (i.e. not on rows/rounds with holes). Inc 1 tr by working 1 tr in next tr, 2 tr in next ch-loop.

PATTERN A.1:
ROUND 1: 1 ch, 1 dc in 3rd ch from previous round, * 3 ch, skip 2 tr, 1 dc in next tr *, repeat from *-*, finish with 3 ch and 1 sl st in 1st dc from beg of round = 56-60-64-68-72-76 ch-loops. Sl sts until 1st ch-loop.
ROUND 2: Work 1 ch, 1 dc in same loop, ** 7 tr in next ch-loop, * 1 dc in next ch-loop, 3 ch *, repeat from *-* 1 more time, 1 dc in next ch-loop **, repeat from **-** the entire round (14-15-16-17-18-19 times in total) - but when repeating the last time, repeat *-* 2 times, then finish round with 1 sl st in 1st dc from beg of round. Sl sts until 1st tr.
ROUND 3: * Work 1 tr in each of the next 7 tr with 1 ch between every tr (NOTE: Replace 1st tr on round with 3 ch) = 7 tr and 6 ch-loops, 1 dc in next ch-loop, 3 ch, 1 dc in next ch-loop *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round. Sl sts until 1st ch-loop.
ROUND 4: Work 1 PICOT - read explanation below - in every ch-loop the entire round (= 7 picots over every repetition), finish with 1 sl st in 1st dc from beg of round. Sl sts until ch-loop on 1st picot.
ROUND 5: ** In ch-loop on each of the next 6 picots work * 1 tr in ch-loop, 1 ch *, repeat from *-* 2 times in ch-loop on next picot ** = 8 tr and 8 ch-loops over every repetition, repeat from **-** the entire round, finish with 1 sl st in 3rd ch from beg of round.
ROUND 6 (not shown in diagram): 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop the entire round = 16 tr over every repetition, finish with 1 sl st in 3rd ch from beg of round = 224-240-256-272-288-304 tr. Do not cut the thread.

PICOT:
1 picot = 1 dc, 3 ch, 1 dc in same ch-loop/dc.

PATTERN A.2:
ROUND 1: 1 ch, 1 dc in 3rd ch from previous round, * 4 ch, skip 3 tr, 1 dc in next tr *, repeat from *-*, finish with 4 ch and 1 sl st in 1st dc from beg of round = 56-60-64-68-72-76 ch-loops. Sl sts until 1st ch-loop.
ROUND 2: Work 1 ch, 1 dc in same loop, ** 7 tr in next ch-loop, * 1 dc in next ch-loop, 5 ch *, repeat from *-* 1 more time, 1 dc in next ch-loop **, repeat from **-** the entire round (15 times in total) - but when repeating the last time, repeat *-* 2 times, then finish round with 1 sl st in 1st dc from beg of round. Sl sts until 1st tr.
ROUND 3: Work 1 tr in each of the next 7 tr with 1 ch between every tr = 7 tr and 6 ch-loops, 1 dc in next ch-loop, 5 ch, 1 dc in next ch-loop *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round. Sl sts until 1st ch-loop.
ROUND 4: Work 1 picot in every ch-loop the entire round and finish with 1 sl st in 1st dc from beg of round.

PATTERN A.3 (neck edge):
ROW 1: 1 ch, 1 dc in 1st dc, * 3 ch, skip 2 dc, 1 dc in next dc *, repeat from *-* until 2 dc remain, finish with 3 ch and 1 dc in last dc = 32-34-36-38-40-42 dc and 31-33-35-37-39-41 ch-loops, turn.
ROW 2: Sl sts until 1st ch-loop, 1 ch, 1 dc in same loop, * in next ch-loop work 3 bobbles - read explanation below - with 2 ch between every bobble, 1 dc in next ch-loop *, repeat from *-* the entire row (finish with 1 dc in last ch-loop), turn.
ROW 3: Work 1 picot in every ch-loop and 1 picot in every dc.

BOBBLE:
1 bobble = work 2 tr in same ch-loop - but wait with last pull through on both sts, pull thread through all 3 sts on hook.
----------------------------------------------------------

PONCHO:
Worked from neck and down with vent mid back. The piece is first worked back and forth and then in the round.
ROW 1: With Muskat and hook size 4.5 mm, work 95-101-107-113-119-125 ch, turn and work 1 dc in 2nd ch from hook, then 1 dc in every ch = 94-100-106-112-118-124 dc (divisible by 3 + 1 dc), turn.
ROW 2: Work 3 ch (counted as 1st tr), then work tr in every dc - AT THE SAME TIME inc 31-31-31-33-33-33 tr - READ INCREASE TIP 1 - evenly on row = 125-131-137-145-151-157 tr, turn.
ROW 3 (with holes): 4 ch (counted as 1st tr + 1 ch), * skip 1 tr, 1 tr in next tr, 1 ch *, repeat from *-*, finish with 1 tr in 3rd ch from beg of previous row = 63-66-69-73-76-79 tr with 1 ch between every tr, turn.
ROW 4 (with tr): Work 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop on row - AT THE SAME TIME inc 16-16-16-18-18-18 tr - READ INCREASE TIP 2 - evenly on row, NOTE! Work 1 tr in last ch-loop on row, finish with 1 tr in 3rd ch from beg of previous row = 141-147-153-163-169-175 tr, turn.
ROW 5: Work as ROW 3 = 71-74-77-82-85-88 tr with 1 ch between every tr, turn.
ROW 6: 3 ch, 1 tr in 1st ch-loop, work 2 tr in every ch-loop on row - AT THE SAME TIME inc 3-5-7-5-7-9 tr evenly on row, finish with 1 tr in 3rd ch from beg of previous row = 144-152-160-168-176-184 tr. REMEMBER THE CROCHET TENSION! Continue to work in the round as follows:
ROUND 1 (with holes): 4 ch (counted as 1st tr + 1 ch), * skip 1 tr, 1 tr in next tr, 1 ch *, repeat from *-*, finish with 1 sl st in 3rd ch from beg of round = 72-76-80-84-88-92 tr with 1 ch between every tr.
ROUND 2 (with tr): 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop the entire round - AT THE SAME TIME inc 4 tr evenly on round, finish with 1 sl st in 3rd ch from beg of round = 148-156-164-172-180-188 tr.
Repeat 1st and 2nd ROUND 5-6-7-8-9-10 more times (i.e. inc with 4 tr evenly every other round a total of 6-7-8-9-10-11 times) = 168-180-192-204-216-228 tr on round. Then work 1st and 2nd ROUND alternately WITHOUT inc until piece measures approx. 26-29-31-34-36-39 cm (finish with 1 round with only tr = ROUND 2).
Then work diagram A.1 - see diagram and explanation above. When A.1 has been worked 1 time vertically, there are 224-240-256-272-288-304 tr on round. Then work diagram A.2 - see diagram and read explanation above - 1 time vertically, cut and fasten the thread.

NECK EDGE:
Worked back and forth. Work from RS diagram A.3 - see diagram and read explanation above - around the entire neck edge (start mid back), do not cut the thread. Then work ch for 24 cm, turn and work sl sts in every ch on return = 1 tie, cut and fasten the thread. Work another tie the same way in the corner on the other side of vent.